| Specs |
| Size |
Length-72", Width 37", Overall Height-77" |
| Hydraulic System Pressure, Normal |
1100 psi |
| Ground Height |
14 1/2" |
| Hydraulic System Pressure, Maximum |
1400 psi |
| Ram Face Dimensions |
29 3/4" wide x 18 1/2" high |
| Cycle Time |
36 seconds |
| Hopper |
11 ga. construction 39 1/2" tall with 30"W x 63"L opening and 28" x 23" side access door |
| Ram Face Pressure, Normal |
25.6 psi |
| Ram Face Pressure, Maximum |
32.6 psi |
| Body |
Floor: 1/4" steel plate, reinforced with 3" structural channel |
| Body |
Sides: 1/4" steel plate |
| Ram |
Face 3/8" steel plate, reinforced with 5" structural channel UHMW Guide Systems |
| Motor |
3 hp. TEFC, 208/240/480 VAC-3 phase, 1750 rpm, 1.15 serv. fact. |
| Controls |
All controls mounted in a NEMA 12 & 13. Outdoor enclosure control panel is UL approved, and is mounted on Hyd. Power Unit |
| Control Features |
Mounted in Control Box: (1) Stop and Start Pushbutton (2) Reverse Pushbutton (3) 100% FULL Indicator Light (4) Automatic cycle control activated by a photo-electric cell mounted in the hopper (5) Hopper door Interlock switch |
| Hydraulic Pump |
Rotary Vane type (1) Capacity 4.5 gpm @ 1100 psi |
| Compaction Force Rating, Normal |
13,800 lbs. |
| Compaction Force Rating, Maximum |
17,500 lbs. |
| Hydraulic System Design Pressure |
2500 psi |
| Hydraulic Cylinder Bore |
4" |
| WASTEC Rating |
0.27 cu. yd. |
| Discharge Opening |
30"W x 22 7/8"H |
| Total Weight |
1800 lbs. |
| Hydraulic System Location |
Hydraulic power unit is completely self-contained and located on top of the compactor frame, reservoir capacity 11 gal. |
| Hydraulic Cylinder Rod |
2" diameter |
| Hydraulic Cylinder Stroke |
28" with internal poppet valve |
| Ram Penetration, Minimum |
5 1/2" |
| Clear Top Opening, Minimum |
25"L x 30"W |
Sitemap... click here
For
further compactor, baler, and drum crusher information, please call or fax us at the numbers below.
